Fume Hood manufacturer

Product Description

• Bench Type Fume Hood With Blower
• Dimension L=1500mm, D=940mm, H=2250mm

Design Structure

• Aerodynamic, Floor mounted

Airflow type

• Auto by pass type (for non AC labs)

Exterior Construction

• 1.2 & 1.5 mm heavy duty electro galvanized CRCA (as per IS: 513) sheets with epoxy powder coating and rigid structure.

Interior Construction

• Chemical and Heat resistant, Fire retardant, Smooth finish, Easily Cleanable Panels made out of durable material integral work walls, 6 mm thick.

Front Top Panel

• Easily open able hinged top panel for easy access to Flow control Valve and electrical lighting fixtures for maintenance.

Airfoil

• Aerodynamic design. Horizontal airfoil mounted on the worktop made of 1.6mm thick CRCA sheet.

Worktop

• Chemical resistant slash and spillage proof dished Jet black granite worktop (18 to 20 mm thick).

Sash (Shutter)

• Vertical rising counter-balanced sash. Toughened Float Glass sash for full work area visibility (5 mm thick). Smooth and light sash operation. Clear operable height (750 mm).

Lighting

• Fluorescent light (20 watt, 1 nos.) with vapour proof housing and fitting for proper illumination.

Electrical Utilities

• 3 Nos. of 5/15 amp electrical points shall be provided on the right side of the fume hood with tube light switch. Pushbutton starter and electrical connector shall be fixed on the top of the fume hood with all internal connections.

Working Surface`& Drip Cup

• 19mm thick super black granite will be provided for the table top of fume hood also PP Small drip cup for the draining of water from the fume hoods.

Utility Services

• Remote operated services fitting will be provided inside the fume hood with 1 Water, 4 Nos. for Gas.

Centrifugal Blower

• 1500 CFM Chemical & heat resistant PP+FRP blower with aerodynamically balanced impeller, with drain plug. Conforming to fume hood face velocity as required. Electrical motor 1.5 HP, 3 phase TEFC, IP55, Class F, direct drive foot mounted motor will be provided.